|
628-Pitching 6 Volt, 2.9 Amp Battery |
|
|
6 Volt, 2.9 Amp Rechargeable
Sealed Lead Acid Battery
Part number: PS-628
Terminals= F1 0.187"
x 0.032" Quick Disconnect
Tabs
Dimensions: 2.60" Length x 1.30" Width x 3.86"
Height (4.06" Height over terminals) Weight: 1.5 lbs
- Absorbent Glass Mat (AGM)
technology for superior performance
- Valve regulated, spill
proof construction allows safe operation in any position
- Power/volume ratio yielding
unrivaled energy density
- Rugged impact resistant ABS
case and cover (UL94-HB)
- Approved for transport by
air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified
- U.L. recognized under file number MH
20845
Our batteries feature AGM construction. AGM stands for
Absorbed Glass Mat; this is the latest technology in battery production today.
AGM construction gives you a completely sealed liquid-free battery which
will not leak or corrode.
THIS BATTERY MUST BE PROPERLY CARED FOR.
PLEASE USE THE FOLLOWING GUIDE
LINES:
WHEN NOT
IN USE, THIS BATTERY MUST BE CHARGED EVERY 3 MONTHS.
AN AUTOMATIC
BATTERY CHARGER OR FLOAT TYPE CHARGER, NO GREATER THAN 1.5 AMP SHOULD BE
USED.
CHECK THE TERMINALS
FOR CLEANLINESS AND LOOSE CONNECTIONS.
STORAGE OF THE BATTERY SHOULD BE BETWEEN 62 &
82 DEGREES FAHRENHEIT.
THIS IS A SEALED BATTERY AND
SHOULD NEVER BE OPENED OR TAMPERED WITH.
FAILURE TO ADHERE TO THESE GUIDELINES, WILL SHORTEN THE
LIFE EXPECTANCY OF THE BATTERY, AND MAY VOID THE WARRANTY.
Only the
batteries are shipped with your order. Existing cables and connectors must be
re-used.
Please note the information
listed is for a single battery. Certain models/systems require two or more
batteries. Please verify the amount of batteries you need.
|